Compatible controls
Each control type has different compatible controls as shown below:
Light
The compatible controls for the Light type are:
| Display | Function |
|---|---|
| 1 Button | Icon switch |
| Hold/Release | |
| Two Objects | |
| 2 Buttons | Icon switch |
| Switch + Indicator |
Switch
The compatible controls for the Switch type are:
| Display | Function |
|---|---|
| 1 Button | Icon switch |
| Hold/Release | |
| Two Objects | |
| 2 Buttons | Icon switch |
| Switch + Indicator |
Logs
The compatible controls for Logs depend on the type of control configured in the device.
To check which controls allow recording logs, please refer to the device documentation:
- Z50, Z70, Z100, RemoteBOX: User Manual
Final compatibility will depend on the specific control configuration in the KNX project.
Dimmable Light
The compatible controls for the Dimmable Light type are:
| Display | Function |
|---|---|
| 2 Buttons | Lighting control |
Note that the on/off function and the dimming function are listed separately, but for correct operation in most cases the same control should be selected.
To be able to adjust the brightness, the Absolute regulation object (used for timers and macros) must be active and linked to the device.
Dimmable Light (Color Temperature)
The compatible controls for the Dimmable Light (Color Temperature) type are:
| Display | Function |
|---|---|
| 2 Buttons | Lighting control |
Note that the on/off function, the dimming function, and the color temperature function are listed separately, but for correct operation in most cases the same control should be selected.
To be able to adjust the brightness, the Absolute regulation object (used for timers and macros) must be active and linked to the device.
To be able to adjust the color temperature, the Color temperature control must be active and linked to the device.
Scene
The compatible controls for the Scene type are:
| Display | Function |
|---|---|
| 1 Button | Scene |
Temperature Indicator
The compatible controls for the Temperature Indicator type are:
| Display | Function | Type |
|---|---|---|
| Indicator | Temperature | — |
| 2 Buttons | Switch + Indicator | Temperature |
| Climate control | Setpoint temperature | "Setpoint is primary and actual is secondary" or "Setpoint is secondary and actual is primary" |
When using controls with multiple objects, the actual temperature object must be selected.
Thermostat
The compatible controls for the Thermostat type are:
| Display | Function |
|---|---|
| Climate control | Setpoint temperature |
| Climate control | Thermostat combo |
The compatible controls for the monitoring function of the Thermostat type are:
| Display | Function | Type |
|---|---|---|
| Indicator | Temperature | — |
| 2 Buttons | Switch + Indicator | Temperature |
| Climate control | Setpoint temperature | "Setpoint is primary and actual is secondary" or "Setpoint is secondary and actual is primary" |
Note that the actual temperature monitoring function and the setpoint temperature control function are listed separately, so the appropriate control must be selected for each case, as not all configurations for the Setpoint temperature control include an object to display the actual temperature.
When the Thermostat mode is Dynamic, the compatible controls for the Climate mode field are:
| Display | Function | Type |
|---|---|---|
| Climate control | Thermostat combo | With a climate mode function configured (Cool/Heat or Extended modes), or with the heat/cool status object of the setpoint |
| Climate control | Mode | "Heat/Cool" or "Extended" |
If the thermostat combo has several mode sources configured, they are used in this order of priority: the Extended modes function, the Cool/Heat function and, finally, the heat/cool status of the setpoint.
Extended modes (auto, heat, cool, fan and dry) are displayed in Google Home, Yasmina, Алиса and direct controls. Alexa only supports the heat and cool modes; in any other mode it displays the thermostat in heat mode.
Blinds
The compatible controls for the Blinds type are:
| Display | Function |
|---|---|
| 2 Buttons | Blinds |
To be able to open or close the blind, the Position blind object (used for timers and macros) must be active and linked to the KNX device.
RGB Light
The compatible controls for the RGB Light type are:
| Display | Function |
|---|---|
| Other | RGB Control |
| RGBW Control |
Numeric Keypad
The compatible controls for the Numeric Keypad type are:
| Display | Function |
|---|---|
| Other | Numeric Keypad |